PR&E DMX Digital Mixing Console

In stock
Brand: WheatstoneWheatstone


dmx16-duo52
dmx16-duo52dmx16-ovhd-100517-3000px86dmx16_engine_rear_083117dmx_razor_16a_front_083117_108193755dmx_inputstripdmx_masterstripdmx_connectpre-navigator-xysurface-setup-app

Utilising a WheatNet-IP protocol-based network and engine, the DMX is the first PR&E console to offer AoIP networking and expansion. This means that you get the speed and flexibility to have a complete, self-contained setup, and the ability to add-on, without the need for an external switch.

PR&E Mix Engine uses RJ45 connectors for all audio (StudioHub+ format), logic (WheatNet-IP-format), and network connections, except for the 2 mic preamp inputs (XLR).

Connections include Mic Preamps Out; 4 stereo/dual mono analogue inputs; 4 stereo/dual mono digital inputs; four stereo Program outputs (both analogue and digital); 4 stereo analogue Monitor outputs (Control Room, Studio, Cue, and operator headphones); 6-port logic GPIO; Engine Ethernet port; 5-Port Ethernet switch to network the Surface, Engine, and three additional devices.

 With two sizes of control surface (8- or 16-channel) available, DMX puts a lot of radio control into a very small footprint – everything you need to take it to the air.

DMX utilises WheatNet-IP protocol to access, control, and process any and all audio sources on the network. Each of the Razor I/O Interfaces provides you with 8 analogue, digital, or analogue/digital inputs and outputs, as well as logic and Ethernet connections on RJ45 connectors.

PR&E networked consoles can also be used with Wheatstone's M-4IP USB four-channel mic/voice processor over its network.

Features:

  • Standalone production or on-air console with local inputs and outputs
  • 5-port Ethernet switch built into PR&E Mix Engine - no need for an external switch
  • Control surface sizes for 8-, 16-faders
  • WheatNet-IP protocol with 1Gb connectivity - any source to any fader
  • Bus Minus (N-1) on each input channel
  • Four program output busses
  • Four event buttons for recalling entire console setups at the touch of a button
  • Control room, studio, and headphone jack (with built-in amplifier w/level control)
  • Full EQ functions (4-band parametric with high/low pass and high/low shelving) and full dynamics (compression, limiting, and expansion) on every channel 
  • Multi-function channel-encoder knob with OLED display on each channel for control of EQ, dynamics, sources, pan, mode, and more
  • Talkback and cue functions
  • Built-in timer
  • Six logic GP I/O ports for network control
  • PR&E Mix Engine is configured: 2 mic inputs on XLRs, with all additional I/O on RJ-45 connectors: 4 analogue inputs, 4 digital inputs, 4 analogue outputs, 4 digital outputs, 2 analogue mic outputs, Headphone output, Cue output, Studio output, and Control Room output. There are also 5 ethernet ports that will interface directly with optional I/O Razor Interfaces, and a 1 Gb ethernet port for networking.
  • Optional Razor I/O Interfaces can expand the system I/O with 8 stereo or 16 mono in and/or out; available in analogue, digital or analogue/digital version

No External Switch Needed

With the PR&E Mix Engine, we've provided five Ethernet ports for interfacing the Surface, the Engine, your PC for use with PR&E Navigator or PR&E Surface Setup, as well as optional devices such as VoxPro PC, a media server, or a couple of Razor I/O units for expansion. Essentially acting as a built-in switch, this keeps IT management and procurement costs down while making it dead simple to expand your AoIP network.

Of course, if you DO want to expand even further and add more DMX consoles, you can add a managed gigabit switch and be off and running to a larger network.

Any channel can be assigned to one or more program output busses, making your material available to an on-air feed as well as an internet stream, for instance.

Any input can be called up on any channel on the DMX. This means, for instance, the feed you’ve got plugged into input 7 on the back of the Engine (or ANY Razor I/O Interface) can show up on channel 2…or any other channel. Same with any input.

Full Parametric EQ and Dynamics Processing on Every Channel

The DMX has 4 fully parametric EQ bands with peak/shelf control for the low and high bands plus high and low pass filters - on every channel. Same with compression, limiting, and expansion dynamics control - a full suite on every channel. When editing, the functions spill out across channels on the DMX letting you see the entire picture at once. When you are done editing, just close out and the board goes back normal display functions.

With full colour OLED displays and colour-coded functions, you can see all your settings at a glance.

Mix-Minus/Direct Output/Talkback

Each fader has a dedicated Mix-Minus output that includes all active faders on its selected source bus, except for itself. These auto generated monaural Mix-Minus signals may be routed to feed telephone hybrids or other devices as required. Alternately, these outputs may be set to provide a separate direct output from that channel only, consisting of the source assigned to that channel. Each channel has a talkback that will interrupt the feed to that mix-minus.

 

Related Products

Results 1 - 4 of 4